The SANICUBIC 2 VX is ideal for residential buildings, commercial buildings, restaurants, schools, hotels, shopping centres.

  • 2 motors for more intensive use
  • Numerous inlets available
  • Standard equipment

The SANICUBIC 2 VX has vortex KXV6 technology enabling 50mm diameter evacuation. In addition, the two motors enable operation in all circumstances. Its 5 inputs make it possible to connect all the sanitary facilities required. It comes with remote control and alarm as standard. Lastly it is available in single-phase and three-phase versions. It is the most complete and the most high-performance in the SANICUBIC range.


This floor-standing pumping station is made in France at the Brégy (60) SFA factory. It has thus received the Guarantee of French Origin.

SANICUBIC 2 VX datasheet

Inlet diameter
• 1 inlet DN 40/50 (Ø ext. 40/50 mm) • 4 inlets DN 40/50/100/110 (Ø ext. 40/50/100/110 mm)
Recommended discharge pipe diameter
80/110 mm
Motor power
SANICUBIC® 2 VX (single-phase): 2 x 2000 W
Supply voltage
SANICUBIC® 2 VX (single-phase): 220-240 V / 50 Hz
Electrical class
IP rating
Maximum flow rate
SANICUBIC® 2 VX monophasée : 40 m3/h
Maximum absorbed current
SANICUBIC® 2 VX (single-phase): 16 A
Maximum incoming water temperature
70 °C intermittently (max 5 min)
Discharge pipe diameter
DN100 (Ø ext. 110 mm)
Control box IP rating
Weight (including accessories)
SANICUBIC® 2 VX (single-phase): 59 kg
Maximum recommended depth
SANICUBIC® 2 VX (single-phase): 6 m (DN100) and 10 m (DN80)
Tank volume
120 L
Vent diameter
75 mm
Maximum depth (Q eq 0 L/min)
SANICUBIC® 2 VX (single-phase): 13 m
ON/OFF level
166/100 mm
Alarm level
240 mm
50 mm
Possible connections
Connection options: blackwater from several toilets, greywater from bathroom, kitchen, laundry