The SANICUBIC 2 Pro is a high performing macerator pump that enables the removal of grey and black water from any commercial premises from a distant basement. It contains two separate, load balanced pumps with high performance macerating systems and will operate alternatively. In the event of inflow overload, both motors run at the same time or in the unlikely event that one motor fails, the other one will take over.

  • Discreet installation
  • Various configurations possible
  • Certified water tightness
  • Remote control as standard



The SANICUBIC 2 Pro has ProX K2 shredder technology which reduces clogging.

The two motors enable operation in all circumstances.

 Its 5 inputs make it possible to connect all the sanitary facilities required.

Click here for other models in the SANICUBIC range 

SANICUBIC 2 Pro datasheet

Number of available inlets
Inlet diameter
• 1 inlet DN 40/50 (Ø ext. 40/50 mm) • 4 inlets DN 40/50/100/110 (Ø ext. 40/50/100/110 mm)
Motor power
2 x 1500 W
Supply voltage
Electrical class
IP rating
Maximum incoming water temperature
70 °C intermittently (max 5 min)
Discharge pipe diameter
DN40 (Ø ext. 50 mm)
Control box IP rating
Weight (including accessories)
35 kg
Maximum recommended depth
11 m
Tank volume
45 L
Vent diameter
50 mm
Maximum depth (Q eq 0 L/min)
13 m
ON/OFF level
140/60 mm
Alarm level
210 mm
Possible connections
Connection options: blackwater from several toilets, greywater from bathroom, kitchen, laundry